Read an AquaRite salt display
Tell an average, an instant reading and metric mode apart before comparing two numbers.
Average and instant salt can tell different stories
Hayward’s residential AquaRite troubleshooting guide distinguishes the usual average salt display from the instant salt diagnostic. A reading with a “P” can indicate desired output percentage. That percentage describes the generator setting and cannot be compared with the salinity of a water sample.
A display showing 3.20
For the classic AquaRite described in the guide, a decimal salt reading can indicate metric mode. If the unit is g/L, 3.20 g/L equals 3,200 ppm. Entering 3.20 into a field labelled ppm makes a thousandfold error. Record the unit before transcribing the number.
A diagnostic showing −3,200
The instant salt diagnostic can display a minus sign. When recording concentration, use the magnitude, 3,200 ppm, and label it “Instant reading”. Keep the sign in the notes if useful. If an independent test reports 3,300 ppm, the two recorded magnitudes differ by 100 ppm. Whether that difference is meaningful depends on the instrument and its stated precision.
Check the guide for the installed control before changing a setting. If the independent results and panel still conflict, keep a log and bring the model numbers and dates to the service desk.
Salt readings worksheet