When the cell and the pool shop disagree
Work through a 1,000 ppm gap, record comparable samples and decide what to test next.
A panel at 2,200 ppm and a shop test at 3,200 ppm
Subtracting the panel from the independent result gives a 1,000 ppm gap. An average of 2,700 ppm describes neither measurement. For a classic Hayward AquaRite the independent test already matches the 3,200 ppm figure used by Hayward’s salt chart. Adding salt on the strength of the panel alone could push the concentration above the intended level.
Make the readings comparable
- Copy the control-box model, cell model, displayed units and time. On an AquaRite, record whether you read average or instant salt. On an IntelliChlor with indicator lights, write down the light instead of inventing a number.
- Record recent salt additions, refills, rain and circulation. Take a fresh sample following the water-test instructions once the water has mixed as your manual specifies.
- Ask which method the shop used. Repeat the independent salt test at the same precision and keep both readings. A chlorine reading in ppm is a different measurement.
What to take to the service desk
Bring the panel reading, independent result, repeat result, cell model and sample time. If the discrepancy persists, Hayward’s troubleshooting guide includes a check that the configured TurboCell type matches the installed cell. A green light on a different system cannot settle that comparison.
With the original 2,200 and 3,200 readings still unexplained, the worksheet shows the discrepancy and withholds a salt weight. Print that record even if you have only one independent result.
Salt readings worksheet